Pipe Trunking - Continuous Backing System

A continuous backing system of pipe containment which completely encloses the pipes in a box section. Any small unevenness of the installation surface can be overcome, as the system is in continuous contact with the installation surface, and does not rely solely on the pipe clips. It is recommended that a minimum of three double pipe clips are used per 2.5 metre length.

PTR210 Shown for illustration purposes with 2 x microbore pipes (8/10mm) and PTCL210 double pipe clips		PTR215 Shown for illustration purposes with 2 x 15mm pipes and PTCL215 double pipe clips
REF PTR210PACK QTY 25CLIP REF PTCL210PACK QTY 75		REF PTR215PACK QTY 25CLIP REF PTCL215PACK QTY 75
PTR210 Shown for illustration purposes with 2 x microbore pipes (8/10mm) and PTCL210 double pipe clips		PTR210 Shown for illustration purposes with 2 x microbore pipes (8/10mm) and PTCL210 double pipe clips
REF PTR222PACK QTY 10CLIP REF PTCL222PACK QTY 30		REF PTR228PACK QTY 6CLIP REF PTCL228PACK QTY 36

PTCL210 DOUBLE PIPE CLIP		PTCL215 DOUBLE PIPE CLIP		PTCL222 DOUBLE PIPE CLIP		PTCL228 SINGLE PIPE CLIP
PACK QTY 75		PACK QTY 75		PACK QTY 30		PACK QTY 36

ACCESSORIES

A range of accessories are available for the PTR210, PTR215 & PTR228 pipe trunking systems comprising of internal, external and flat angles,
flat tee pieces and stop ends.

										ACCESSORIES STANDARD PACK QUANTITIES PTR210 Accessories 25 PTR215 Accessories 10 PTR228 Accessories 1
INTERNAL ANGLE		EXTERNAL ANGLE		FLAT ANGLE		FLAT TEE		STOP END
REF  FIA 3 to fit PTR210 REF  FIA 5 to fit PTR215 REF  FIA 32 to fit PTR228		REF  FEA 3 to fit PTR210 REF  FEA 5 to fit PTR215 REF  FEA 32 to fit PTR228		REF  FFA 3 to fit PTR210 REF  FFA 5 to fit PTR215 REF  FFA 32 to fit PTR228		REF  FFT 3 to fit PTR210 REF  FFT 5 to fit PTR215 REF  FFT 32 to fit PTR228		REF  FSE 3 to fit PTR210 REF  FSE 5 to fit PTR215 REF  FSE 7 to fit PTR222 REF FSE 32 to fit PTR228